DAEWOO DVD-T6300N

It has been reported that the region setting of the Daewoo DVD-T6300N can be changed from the remote. This has not been verified. If you try this method, please report whether or not
it works by visiting THIS forum.

1. Open the disc tray

2. Push SETUP on the remote control.

3. On the remote control, push the following buttons:

X 3 0 1 0
(where X = your choice of Regions 1 through 9;
Region 9 = BYPASS/REGION-FREE)

STEP
SHUFFLE
NEXT

4. There will be nothing shown on the screen as you perform Step 3.

You MAY be able to verify whether the region actually was changed by doing the following:

a) Open the disc tray

b) Push the following buttons on the remote control:

SETUP
SHUFFLE
STEP >|<
NEXT >>|

This will reveal a "secret menu" screen.

5. Push the down-pointing arrow on the remote
until the DEBUG menu appears.

6. If the check-mark on the right column
matches the number you chose for "X" in Step 3
(your desired region choice), then you are done!

In the example illustrated above, "9" (Region 9)
was chosen for "X" in Step 3.

THE DEBUG MENU DOES NOT ALLOW YOU TO
CHANGE THE REGION SETTING. IT ONLY LETS YOU
CHECK THE REGION SETTING. YOU MUST PERFORM
STEP #3 ABOVE IN ORDER TO CHANGE THE REGION SETTING.

NOTE: The firmware should be "RCE-proof", so selecting Region 9
should play ALL DVDs without problems, including
RCE-encoded discs.

WHAT ABOUT MACROVISION?

At this time, there is no known Macrovision hack for the DVD-T6300N. More information is needed about the hardware used in this model.

A quick and easy way to provide information is
to push the following buttons on the remote control:

1. SETUP

2. VOL+

You should now see a screen which looks similar to the following:

If you see a screen like this, write down all of the information
that is displayed. Then go to THIS forum and post a message
detailing exactly what is shown on the screen.

It would be even more helpful if someone with a T6300N could open the cover from
his/her player and take pictures of the inside. In particular, it is important to
see pictures of the loader (the DVD disc drive) and the main circuit board. If you can
provide pictures, please send them via E-MAIL.

WHERE TO GET HELP

Daewoo forum on Nerd-Out.com

TYT Clones Yahoo Group

Please Note! I do not own a Daewoo DVD-T6300N player. All care taken in accurately providing this information which is kindly provided by others who do own these models. Please visit the sites linked above if you require any assistance.

ALSO NOTE I AM NOT A FIRMWARE PROGRAMMER!!!
So please don't ask me when other features will be available...